Press "Enter" to skip to content

Which is better to heat a pool Gas or electric?

Which is better to heat a pool Gas or electric?

By nature, gas heaters have a greater environmental impact than electric. However, electric takes longer to heat up your pool water and is less efficient in colder temperatures. Additionally, to set up a natural gas pool heater, you will have to connect the unit to your gas line. Propane needs a propane tank to work.

Is it cheaper to run a gas or electric pool heater?

On average, nevertheless, a gas heater costs around $200 to $400 a month to run. Electric heat pumps cost less, coming in at about $100 to $200 per month. This difference in operating costs makes it clear that, though more expensive to install, an electric heater could save you money in the long term.

Is an electric pool heater worth it?

This type of pool heating system is more reliable and efficient compared to other types of pool heating systems. Although electric heaters are a bit more expensive than the traditional gas powered heaters, it consumes less energy than the gas powered type so you end up spending less money on your heating bills.

What type of pool heater is best?

  • Best Overall: Hayward HeatPro W3HP21004T Pool Heat Pump.
  • Best Budget: SmartPool S601P SunHeater Solar Heating System.
  • Best for Above Ground Pools: Hayward H-Series 100,000 BTU Propane Above Ground Pool Heater.
  • Best Electric: Ecosmart US SMART POOL 27 Electric Tankless Pool Heater.

What size pool heater do I need for 16×32 inground?

Heat Pump Sizing Chart – Inground Pools

Pool Size (Feet) Summer 4 BTU’s Spring & Fall 5 BTU’s
Up To 10,000 Gallons 12′ x 24′ 50,000 BTU 50,000 BTU
Up To 15,000 Gallons 14′ x 28′ 85,000 BTU 85,000 BTU
Up To 20,000 Gallons 16′ x 32′ 85,000 BTU 110,000 BTU
Up To 25,000 Gallons 18′ x 36′ 110,000 BTU 125,000 BTU

What is the most cost effective pool heater?

Solar pool heaters

What is the cheapest way to heat your pool?

Here are the seven cheapest ways to heat your pool this off-season.

  1. Use a Solar Cover.
  2. Invest in Solar Sun Rings.
  3. Try Out a Liquid Solar Pool Cover.
  4. Build a Windproof Pool Enclosure.
  5. Use the Black Hose Trick.
  6. Snag a Pool Heat Pump.
  7. Combine a Solar Cover and Pool Heat Pump.

Are pool heaters expensive to run?

The cost to run a pool heater, is free for Solar Heaters, about $100-$200/mo for Heat Pumps and in the range of $200-$400/mo for a Gas Heater. Your actual heating expense will vary month to month, according to outside temps and weather.

What is the most efficient way to heat pool?

If you want an energy-efficient way to heat your swimming pool, consider using a heat pump pool heater in mild climates. Solar water heaters are cost competitive with other types of water heaters and have low annual operating costs.

Should I leave my gas pool heater on all the time?

It is not advisable to heat your pool at night because of the time and energy it will consume. You’re advised to heat your pool during the day for more efficiency, and if you can, buy a solar blanket to retain the temperature of your pool.

Does a pool heater use a lot of electricity?

Heat pumps will use around 5,000 watts or 5 kilowatts per hour per 100,000 BTU’s. For a typical size 100,000 BTU heat pump, that’s 5 kilowatts per hour. The average for electricity in our area runs $. 16 cents per kilowatt hour….How much electricity does an electric pool heater use?

Type of Heater Cost per Year Cost Per Month
Heat Pump $700-$2,400 $120-$200

Should I heat my pool overnight?

One of the reasons you aren’t recommended to leave your pool heater turned on overnight is that it may cost a fortune to keep the pool heated for all those hours. Operating and energy costs may also increase especially on colder nights.

How much heat does a swimming pool lose overnight?

A pool that is uncovered can lose up to 5 degrees F overnight; a good cover can cut that loss by half. Used at night or whenever your pool is not in use, the pool cover can help save fuel costs by cutting heat loss regardless of the type of heating you utilize.

When should I not run my pool heater?

If you are trying to save money or energy, run your heater only when the pool water temperature dips below 78. If the water is sufficiently warm, the air temperature will be less important. Temperatures in the 50s, and even 40s, can be tolerated if the heater is keeping the pool water warm.

Is it cheaper to leave a pool heater on all night or shut it off at night and restart it in the morning when the pool temperature drops 10 F?

We have found that turning the heater off at night allows the water to cool rapidly. The heater then has to burn at a higher rate in the morning to make up the lost heat. The higher you turn the burner the lower the heating efficiency and the greater the heat loss from the exhaust gases.

How long does it take a pool to heat up with a heater?

Overall, a heat pump usually requires between 24 and 72 hours to heat a swimming pool by 20°F (11°C) and between 45 and 60 minutes to heat a spa by 20°F (11°C).

How long does pool take to heat?

On average, time to take for a pool to heat up by the sun is 8 to 12 hours. Also, note that you may not get your desired temperature only with the sun. You can increase its heating rate and more temperature by using a solar cover. A solar cover traps the heat and keeps the pool water warm.

How much does it cost to heat a pool for one day?

This means an average pool heater between 300,000 and 400,000 BTU’s will cost anywhere from $6.00 to $8.00 per hour to heat your pool.

How much does it cost to heat a pool one time?

The average cost to heat a pool for one hour on natural gas is around $ 7.00. To heat, an average pool (10-12K Gallon) with no solar cover typically takes 8-14 hours.

How many gallons of propane does it take to heat a pool?

Here’s why: the average propane pool heater burns about 1 gallon of propane per hour per 100,000 Btus. Since a propane pool heater for a standard-sized pool (~21,000 gallons) outputs 400,000 Btus, you will burn about four gallons of propane per hour.

How long does it take to heat a 10000 gallon pool?

It depends on the size of your pool but a 116 BTU heater will raise 10000 gallons of water about 1.4 degrees per hour. 20000 gallons 0.7 degree per hour.

How long does it take to heat a pool 20 degrees?

How Long Will It Take to Heat the Swimming Pool? A heat pump has the ability to heat a pool by 20 degrees Fahrenheit within 1-3 days. The coldest temperature for most heat pumps to function and operate is at 50 degrees Fahrenheit.

How much does it cost to run a gas pool heater?

The Average Cost of Running a Pool Heater

Type of Heater Cost Per Year Cost Per Month
Heat Pump $700 to $2,400 $120 to $200
Electric Resistance $2,100 to $7,200 $175 to $600
Propane $2,500 to $10,200 $200 to $850
Natural Gas $1,400 to $4,800 $200 to $400

How long does a gas pool heater last?

With proper installation and maintenance, gas pool heaters typically last five or more years.

What is the most efficient gas pool heater?

Best pool heaters 2021

  1. Pentair 460737 MasterTemp: Best propane pool heater. (Image credit: Pentair )
  2. EcoSmart Smart Pool 18: Best electric pool heater.
  3. Hayward HeatPro HP21404T: Most economical pool heater.
  4. Hayward H-Series H250FDN: Best natural gas pool heater.
  5. SmartPool SunHeater S120U: Best solar pool heater.

What is the fastest pool heater?

Hayward® Introduces Fastest Speed-To-Heat Performance With New 500,000 Btu Universal H-Series Pool Heaters

  • 500,000 BTU input for fast speed-to-heat performance.
  • Standard Cupro nickel Finn Plate™ heat exchanger for superior product value and reliability.

How do I reduce the noise in my pool heater?

Simply placing some shrubbery around the equipment pad to keep the noise level down, or installing a fence should work. Just be sure the heat from your heater will not create a fire hazard!

Why is my pool heater making banging noises?

A common noise made by a swimming pool heater is grinding or grating. You may have an obstruction caused by debris. Debris can prevent water or gas from flowing through the heater. You should start your troubleshooting with a manual flush of your system.